POS Ingenico Device Gallery

From QuickSCRIP Wiki
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.


The following is a reference image gallery for installation and troubleshooting of QuickPOS Signature Pads.

ISC 480

Front

Back

Note: The single HDMI connector plugs into the back of the pad (often secured with two screws). On the opposite end of the cable, a USB connection plugs into the POS register, along with the power cable connector.

Cables - Pad Connection

Cables - PC and Power

Note: The HOST field indicates the connection type. Ideally, this should read USB-CDC.

Startup Screen


LANE 8000

Note: The Lane 8000 connects to your POS using the same cable configuration as the ISC 480 (Pictured above).

Front

Back

Note: You must scroll down on the touch screen to see the Communication Type (Compare the first and second images). Ideally, this should read USB-CDC.

Startup Screen

Startup Screen